|
Sync Generator and
Reverse Video |
SG-2- Two Channel Sync
Generator
--------THIS PRODUCT HAS BEEN DISCONTINUED--------
The SG-2 outputs two independent channels of 1V P-P composite video to drive any two 75
ohm terminated video inputs. The gray scale of the video signal is adjustable from white to black.
One control adjusts both channels identically. The SG-2 is a versatile device and can operate from
the included 110VAC UL/CSA wall transformer or 9-12VDC. Many CCTV products require
a composite video input, usually from a camera, to be operational.
With many quad units, when no video is present, patterns are displayed in the unused quad. The
SG-2 can supply this unused quad a flat field of video so inserted text is readable. The SG-2 can be
the source for a VART system allowing multiplexing of up to 15 alarms down a single coax cable.
If just Time & Date is desired to be displayed on a visible monitor, the SG-2 and a TDCT and
monitor can implement that function. A VSI connected to a computer, fed by the SG-2 to a monitor, can
be an information terminal or menu display for a fast food restaurant. An internal jumper selects
either RS-170A or CCIR.
|
 |
RVID Reverse
Video Adapter
The RVID adapter accepts a standard 1V p-p RS-170A or NTSC composite video
signal as input. The adapter, when selecting reverse, inverts the video
portion of the composite signal and remixes it back with the standard burst
and sync signals. This allows digitizing equipment to sample a video signal
with better resolution. A switch is supplied to route the normal signal
to the output or the reverse signal upon selection. CCIR/PAL version available
upon special order. |
 |
|
Specifications
Input:..... 1V P-P
RS-170A, NTSC, or CCIR via BNC 75 ohm terminated
Output..... IV P-P into 75 ohm terminated or unterminated
load BNC
Power:..... 9 VDC @ 100mA , DC Coax Connector 2.1mm x 5.5mm
BW:..... better than 7MHz 1 dB down
S/N:..... better than 50 dB
|
|
|
Normal
|
Reverse
|
Software Products
IC Inter Communications
This is a public domain communications program for PC computers using MS-DOS.
This program gives the user full access to COM1 or COM2 ports on the computer.
Files can be transmitted or received from disk or data dumps along with many other
features. Software for IBM-PC\XT\AT compatibles - use with VSI for ease of communication.
Requires available serial port and min. 128K RAM. Comes in 3.5 inch disk format.
REROUTE LPT Data to Com Port
A simple TSR program that reroutes printer data from LPT1 or 2 to either COM1
or 2. This program is used on PCs or PC based cash registers to be compatible
with the VSI. Requires DOS 5.0 or higher.
AVE Thailand Co., LTD.
147 Soi OnNut44, (Sampheenong Villa), Sukhumvit 77Rd., Suanluang, Suanluang, Bangkok 10250 Thailand.
Tel: +662 331 9285 ,+662 331 9364 and +662 742 0221
Fax: +662 331 9365 Mobile: +81 838 6805
Email: ave@avethailand.com
